transformer tester is used for analyse and test high frequency transformers,it can test all inductance,leak inductance,DC resistance, pins short, turns, turns ratio of every one winding of transformer by one time automaticaly.Toroid core Coil turns tester is used for test coil turns of toroidal core,it measure precisely the turns of toroid core coil and display by digitial, is best choice for toroid current sensor, toroid current transformer,toroidal inductor,toroidal choke,toroidal filter.Bobbin Coil turns tester is used for test bobbin coil turns and winding turns without core,it measure precisely the turns of coil and winding and display by digitial, is best choice for transformer, relay, motor, choke, filter, inductor, generator,ignition coil,voice coil,cotactor,ect..cable tester is used for test cable harness and cable wires,it can measure resistance of each wire,insulation resistance of each wire,insulation grade of each wire,capacitance of wire between wire,connecting reliable of wires between terminal pins.LCR meter is used for test inductance and capacitance and resistance,it is best choice for inductors,transformers,relays,capacitors,resistors, wires, cables,contactors.DCR tester or Ohm meter is used for test direct current low resistance,it is best choice for measure copper wires,copper foil,electic film, resistor, transformer, inductors, relays, contactors, ignition coil.Soft magnetic core power loss tester is used for analyse power loss of magnetic core,it is best choice for analyse the power loss of High Flux cores,power loss of Molypermalloy Powder (MPP) cores,power loss of Kool Mu cores,power loss of XFLUX Cores,power loss of AmoFlux cores,power loss of Ferrite powder cores,power loss of Nanodust cores,power loss of Sendust cores,power loss of Si-Fe cores,power loss of MPP cores,power loss Neu Flux cores,Iron powder cores,power loss of MnZn cores.Surger tester and winding impulse tester are used for test insulation grade of turns between turns of coil winding,it is best choice for test transformer,inductor,ignition coil,motor,generator,relay,valve coil,contactor,reactor.AC/DC withstand voltage and insulation resistance tester is used for test and analyse insulation grade of the electronic components and electic parts and electric applications,it is best choice for test transformer,inductor,ignition coil,motor,generator,relay,valve coil,contactor,reactor,electronics device,electric equipment,electric machine.HI-POT tester is used for test and inspect the insulation grade of the electronic components and electic parts and electric applications,it is best choice for test transformer,inductor,ignition coil,motor,generator,relay,valve coil,contactor,reactor,electronics device,electric equipment,electric machine.Transformer turns ratio and phase tester is used for test winding turns ratio and phase of the small power transformer,it is best choice for test tuns ratio and phase of transformer.
0086-592-6603065
0086-592-3761682
0086-189 6513 8473
E-Mail: sales@sanshinechina.com , sanshineelectronics@gmail.com Skype: sanshineelectronics QQ: 673469847
Telephone: 0086-592-6603065 Fax: 0086-592-3761682
Address:
